5 Signs You Need A Furnace Replacement

Furnace replacement service usually takes 4-5 days to install the system in your household properly. That’s why our experts furnace replacement in Kansas City recommend that residents not wait for the furnace system to break down before getting professional help. 

It is better to replace it before the winter season starts. It is important to recognize the signs of a failing furnace system and call the replacement service as soon as possible.  

Signs that indicate you need to replace your furnace system

According to the our experts in heating repair in Kansas City, you should contact the technician if you notice the following signs in your household:

Age of the system

A well-maintained air conditioning system keeps the indoors warm for approximately 20 years. However, a furnace system’s efficiency deteriorates after it has been in the household for 15 years. So, if the furnace system’s age is more than 15 years and you need to spend more on its upkeep, we suggest you replace it. So contact our expert HVAC contractor Kansas City.

Yellow pilot light

In older furnace models, you can quickly tell whether you need a heating service by looking at the pilot light. If you see a yellow or orange pilot light, it might signify incomplete combustion. It can be because the furnace system is worn down and exhausted. If the pilot light is flickering, it is a sign that dust is accumulated in the furnace system. 

Loud and strange noise

The furnace system cannot work without producing noise. However, if you start hearing noises like rattling, screeching, popping, or shrieking, you should call the technician for a quick inspection. It is worth calling the technicians for heating installation in Kansas City to fix the issue.

Dust in the surroundings

A dirty and dusty air filter is mostly behind the issue, polluting the indoor air. That’s why experts recommend replacing it annually to maintain indoor quality levels. Sometimes, the reason behind degraded air quality is worn-down furnace units. Rust on the mechanical component signifies that you should start considering the replacement service.

Heating problems

If you are having difficulty controlling the furnace system and it is not working, then it is time to replace it. It is best to contact the technician of heat pump repair in Kansas City for a quick inspection if your system is working improperly. The technician will advise you on the best possible solution to fix the problem.

Signs of improperly working furnace systems

If you are facing problems like:

  • Some spaces in your household are warm, and some are cold.  
  • The furnace takes time to ignite.
  • Difficulty in operating the furnace system with the thermostat.
  • The heating system takes time to reach the desired temperature. 
  • Inefficient heating.

The repair professional from heating services in Kansas City will assist you and promptly inspect the furnace system. The furnace problems could be due to an issue building inside the furnace system.

To summarize

No one wants to spend a day in the winter without a working furnace. Look for the signs, and after self-inspection, call Delta T Heating and Cooling for HVAC near me if you think it is time to repair or replace your heating system. Call our technicians at (913)-687-1494 and schedule an appointment today. 

How To Prepare Your Furnace For Winter?

Preparing your furnace to function optimally and efficiently for the winter season is essential. With the help of a heating repair in Kansas City, KS, you can winterize your furnace and ensure it will run smoothly throughout the season.  

Expert's guide to preparing the furnace system for winter

Remove the dust from the furnace system

A layer of dust gets collected on the top of the furnace unit and the components. It is better to take a cloth and a brush to clean the furnace system since the system can develop problems due to excessive dust which will affect the indoor air.

Replace the air filters

Air filters are responsible for circulating clean and healthy air in your household. Visit the nearest HVAC contractor in Kansas City to buy a new and effective air filter for your furnace system. It is quite easy to replace the air filter, so you do not need any expert’s help for air filter replacement. If your HVAC system has a humidifier, replacing it and setting the humidistat is better. 

Clean the heat exchanger

The heat exchanger is a fundamental component of the furnace system. First, when you open up the furnace system, check the condition of the heat exchanger. If there are any cracks or signs of damage, we suggest you consult a heater installation in Kansas City, KS. 

If everything looks in working order, take a brush and dust off the heat exchanger. Now, remove the fine dust particles with the help of a vacuum cleaner. 

Lubricate and clean the blower motor

The blower motor and fans help push the furnace system’s air. Firstly, you should go through the furnace manual to see if the unit needs oiling. If it does, you can purchase mechanical oil from the nearest HVAC store to lubricate the blower motor and fan.

There are oil ports through which you can lubricate the system. You have to remove the caps and lubricate the bearings.

Inspect the igniter switch

If you have an older model furnace, you might have to relight the pilot light. The latest models of furnaces have an electronic ignitor. If the ignitor is not working, reset the furnace system. Call for heating services in Kansas City, KS area, if the furnace does not ignite.  

Examine the chimney

If you see the chimney is dirty, call the technician to clean it. A dirty chimney has a higher potential of causing carbon monoxide leakage. At the same time, ensure the carbon monoxide detectors are in working order.

Switch on the thermostat

After all the cleaning and checking, it is time to switch on the thermostat and ensure the furnace is working appropriately. Contact a technician if the furnace doesn’t work properly.

Conclusion

It is best to prepare your furnace at the end of the autumn season. If you find an issue in the furnace functioning, you can quickly address the issue by contacting an experienced professional. Call 913-687-1494, and Delta T Heating and Cooling technicians will be on your doorstep in no time to fix the furnace system, including all HVAC services near you.

Tips For Conserving Heat In The Winter

Your home’s heating and cooling system can be the biggest energy consumer, possibly using over half of your energy budget. In the summer and winter, when temperature-controlling systems are most frequently used, your utility costs rise significantly.

Winter can be particularly difficult because heating costs can get expensive. Get your system inspected by heating services in Kansas City to conserve heat generated by your heating system and to keep it functioning at peak level.

Effective Ways to Conserve Heat

While many households have their way of keeping their apartments warm and comfortable during winter, we believe that these tips are most helpful:

Let the Sunlight Seep Into Your Home

The sun provides lots of natural heat. During the day, you can take advantage of the greenhouse effect and let the sun naturally warm your house by opening your curtains and blinds.

Eliminate Air Leaks and Drafts

It is a simple, cost-effective, and easy method to air-seal your house. Weatherstripping and caulking usually pay for themselves in energy savings within a year. Caulk should be applied to gaps and cracks between doors and window frames.

Sliding window sashes or the door itself are protected with weatherstripping. If you are still struggling to warm up your house, your heating system might be at fault. Heating services can repair your system and suggest other necessary repairs.

Utilize Insulated Drapes to Keep Heat Inside at Night

You don’t want to let all that solar heat escape once the sun has set. Before the sun sets, close your drapes and blinds at night to help insulate your windows and stop heat loss.

The most effective way to retain heat at night is with insulated curtains. An expert of furnace repair in Kansas City can easily detect and repair the issue with your heating system.

Lower the Thermostat Before Going to Bed

Researchers claim that lowering your thermostat by 10 to 15 degrees for eight hours a day can help you save 10% on energy costs. Lower the thermostat when no one is home and when everyone is asleep.

Under your heavy blankets, you will stay warm and cozy while conserving heat and saving money. The services of a furnace replacement in Kansas City can easily monitor issues and detect them before they get worse.

Heating System Services to Keep Your Home Warm in Winter

The ironic thing about energy conservation in the winter is that many of these methods will also enable you to cut costs in the summer. It all comes down to avoiding energy loss and keeping indoor air inside and outdoor air outside.

Delta T Heating and Cooling ensures that all your efforts for heat and energy conservation don’t go to waste by repairing the heating systems to avoid sudden breakdowns. We also provide dependable furnace replacement.

Your year-round approach for optimal energy efficiency and maximum savings should include air sealing, LED lighting, smart thermostats, and insulated curtains. If your house is still not warm enough for winter, give us a call. We will be happy to help you!

6 Common Furnace Smells Explained

During extreme temperatures and sudden weather changes, HVAC systems help maintain comfort. Furnace systems are an affordable and efficient way to heat your home since they work efficiently and maintain the temperature indoors.

In any case, it is important to keep an eye on the furnace system to see if any issues are developing. Delaying and ignoring the repair service will only increase the damage, and your furnace might stop working as a result. That’s why Delta T Heating and Cooling furnace repair in Kansas City will help you detect the problems before they become a massive mess.

6 Common Furnace Smells

You won’t smell anything unpleasant if the furnace is operating normally. The heat exchanger, ductwork, and ignition system are covered in a thin layer of airborne debris from the HVAC system. As a result, when you turn on your furnace after a while, you might smell some dust burning in the HVAC system.

A household owner can detect what and where the issue is in the furnace system by smelling its odor. According to our experts at heating and air conditioning in Kansas City, here are some smells that every household owner should be aware of:

Burning Wires

Electrical circuit fires are common accidents, so be careful. Wires and rubber are not the only components of the furnace. Overheating causes the entire system to break down, releasing the smell of burning wire, metal, and plastic, indicating that your furnace needs professional repair.

Mold Outbreak

Due to the humidity inside the HVAC system, bacteria and mold thrive in the ducts. Without proper maintenance, regular inspection, and cleaning, this musty outbreak will spread and cause serious health problems. So if you smell something musty or damp around the furnace, don’t ignore it.

Fuel

A slight smell of burning fuel is common in gas furnaces. The burners in the furnace might malfunction if there is a strong smell. An explosion can result from the accumulation of unburned fuel. A strong smell should be turned off from the furnace, and heating services should be called if it persists for a long period.

Gas Leak

A chemical odor is easy to detect, but gas leaks are equally dangerous. The heat exchanger pump or blower motor may leak gas if you smell something chemical and strong around your furnace or HVAC system. In the absence of timely precautions, these gasses can cause fatal accidents. You should contact a company like heat pump repair in Kansas City for assistance.

Dirty Socks Smell

Mold growth on the evaporator may be the cause. When moisture burns in wet coils, a smell like a dirty sock is generated. You can prevent this in your heat pump by cleaning and scheduling timely air duct cleaning. Mold growth restricts airflow and degrades air quality, so do not neglect it.

Plastic

You should immediately check around your furnace if you smell burning or melting plastic. Someone may have mistakenly placed something made of plastic near the furnace. Kids and pets are often involved in this type of incident at home. Be careful not to touch the burnt plastic, and do not pick it up directly.

The Delta T Heating and Cooling technicians will help resolve furnace system issues. We will solve your problems quickly and find solutions to ensure they don’t happen again with the help of our skilled and certified technicians. Contact us today.

Why Is My Heat Pump Making Loud Noises?

If your heat pump is making loud noises, it could be a sign that something is wrong with your unit. In some cases, the noise may be due to a simple issue like loose screws or debris in the fan. However, it could also be a sign of a major problem, such as a compressor failure.

If you’re unsure of what’s causing the noise, it’s best to call Delta T Heating and Cooling for a technician for heat pump repair in Kansas City. We have been providing heating and cooling services to the area for more than 20 years. In addition, we have licensed and highly skilled heat pump technicians who can help diagnose and repair your heat pump.

Reasons That Your Heat Pump Is Making Loud Noises

Here are some causes of heat pump noises:

  • Loose screws or debris in the fan: If you hear rattling or banging noises, it could be due to loose screws or debris in the fan. It is usually an easy problem to fix, and you may be able to do it yourself.
  • Compressor failure: If you hear a loud humming noise, it could be a sign that the compressor is failing. It is a serious problem that will require professional heat pump repair. Contact Delta T Heating and
  • Cooling for an HVAC contractor in Kansas City.
  • Dirty coils: If you hear a hissing noise, it could be due to dirty coils. For the best coil cleaning service, call us today.
  • Worn-out bearings: If you hear a grinding noise, it could be a sign that the bearings are worn out. This is a serious problem that requires professional heat pump repair in Kansas City.

If you’re unsure what’s causing the noise, it’s best to call Delta T Heating and Cooling for a heating repair in Kansas City. Our expert technicians will be able to diagnose the problem and recommend the best course of action.

Ways To Reduce Heat Pump Noise

There are a few ways to reduce the noise of heat pumps which are as follows:

  • Replace Fan and Motor: One way to reduce heat pump noise is by replacing the fan and motor.
  • Sound Dampening Insulation: Another way to reduce heat pump noise is by adding sound-dampening insulation. It will help to absorb the noise and make it less noticeable.
  • Installation of Compressor Sound Blanket Wraps: It may be necessary to install compressor sound blanket wraps. It will help to reduce the noise of the compressor.
  • Replace The Unit: In some cases, you may need to replace the heat pump unit. It is a major decision, and you should consult with the experts at Delta T Heating and Cooling before making a final decision.

Though you can find DIY tutorials on the internet, we recommend hiring a professional heat pump repair company to do all the above tasks as it requires technical expertise to complete them safely and efficiently. In Kansas City, we are the right choice for you.

If you decide to replace your noisy heat pump, technicians at Delta T Heating and Cooling can help you choose the best heat pump for your home or business. We have a wide selection of heat pumps from leading manufacturers. Contact us today to learn more about our heating services in Kansas City.

Frequently Asked Questions

When the temperature drops and your home becomes your refuge from the winter chill, the last thing you want is a noisy, inefficient heating system. Homeowners know that peace and comfort go hand in hand, and a quiet, well-functioning heat pump is key to achieving both. In this blog, we'll delve into the world of Delta T Heating and Cooling, your trusted HVAC experts in Kansas City, KS. We'll address common concerns about heat pump noises, maintenance, and troubleshooting, all with a focus on ensuring your home remains a haven of warmth and serenity.

A mysterious and disconcerting sound emanating from your heat pump can quickly disrupt the tranquility of your home. So, what can you do when faced with this issue?
Why is my heat pump making loud noises? It's time to get to the root of the problem. Noise can be indicative of various issues, and identifying the source is the first step to resolution.

Possible Causes of Loud Heat Pump Noises:

  • Loose or Damaged Components: Loose or damaged parts within the heat pump can generate rattling or clanking noises.
  • Refrigerant Leaks: Hissing or gurgling sounds may indicate a refrigerant leak, which can affect your system's performance.
  • Fan Issues: The blower fan or outdoor fan may become misaligned or clogged, leading to noise problems.

Do heat pumps require regular maintenance?

Regular maintenance is the backbone of a well-functioning heat pump system. As a homeowner, it's essential to understand the importance of routine upkeep to keep your heat pump running smoothly.

Key Maintenance Aspects:

  • Cleaning and Airflow Check: Cleaning the heat pump's components and ensuring proper airflow is crucial for optimal performance.
  • Thermostat Calibration: Regularly calibrating your thermostat ensures that your heat pump operates efficiently and keeps your home comfortable.
  • Inspecting and Tightening Electrical Connections: Loose connections can cause unnecessary noise and disrupt your heat pump's operation.
  • Refrigerant Levels: Maintaining the right refrigerant levels is essential for your system's efficiency.

Rattling noises from your heat pump can be unsettling. Let's explore the possible reasons behind these sounds and what you can do to address them.

Possible Causes of Rattling Noises:

  • Loose Hardware: Loose screws, bolts, or fasteners can lead to rattling sounds as the heat pump operates.
  • Debris in the Unit: Foreign objects or debris caught in the heat pump's components can create rattling when in motion.
  • Fan Issues: A misaligned or damaged fan can cause persistent rattling noises.

Buzzing noises coming from your heat pump can be perplexing. Discover the underlying causes and solutions for these unwelcome sounds.

Possible Causes of Buzzing Noises:

  • Electrical Issues: Faulty electrical components or connections can generate buzzing sounds.
  • Vibrations: Vibrations from the heat pump or nearby structures can cause buzzing, which may be addressed through proper insulation and mounting.
  • Refrigerant Flow Problems: Issues with refrigerant flow can result in buzzing or humming noises.

Before calling in the professionals, there are some troubleshooting steps you can take to address noise issues with your heat pump.

Key Troubleshooting Tips:

  • Inspect for Loose Parts: Check for loose or damaged components within the heat pump and tighten or replace them as needed.
  • Clean the Unit: Remove debris and obstructions from the heat pump, ensuring that the area around it is clear.
  • Check Electrical Connections: Verify that all electrical connections are secure and undamaged.

Modern Air Conditioners Increase Energy Savings

Air conditioner is a vital appliance for your home and comfort. It controls your home’s heat and air conditioning to ensure your comfort. However, a central air conditioner can use up a lot of power, especially if it’s an older one that isn’t very efficient. Efficiency improvements in air conditioners have been in focus in recent years.

Some people with older AC systems may not see a need to replace them if they are still functional. However, updating your cooling system with the help of air conditioner repair in Kansas City could be a great option if you want to save money in the long run and avoid costly repairs.

SEER rating in modern air conditioners

Seasonal Energy Efficiency Ratio, or SEER, measures how effective a unit of energy usage is throughout the summer months. An efficient system will have a high seasonal energy efficiency ratio (SEER) rating.

In a positive development, the required minimum SEER for air conditioners is rising. Older systems’ energy efficiency ratio (EER) may be six or lower, whereas current systems are 13 or higher. In slightly under two years, a minimum SEER rating of 14 will be mandated, up from the current minimum of 13. As the number rises, so does the effectiveness of the air conditioner.

Programmable thermostat

The newest air conditioning models also include programmable thermostats. The thermostat is the part of an HVAC system that monitors and adjusts the temperature. If accurate, your machinery will use less power while performing its tasks.

There are a variety of ways in which a smart thermostat might reduce utility costs. These units use a combination of timers, motion detectors, and geofencing to determine when to activate the HVAC system. That’s why they’re so effective at cutting costs when you’re away from home. This machine is incredibly effective because it allows you to control your home’s temperature even while you’re not there.

A modern thermostat allows you to program temperatures based on your routines. When you leave for the day and come back in the evening, the thermostat can make the necessary adjustments to the temperature. You may save money and energy by lowering the temperature when no one is home.

Energy saving features

Recent technological innovations have allowed for the creation of air conditioners that significantly reduce energy usage. Inverter technology is a feature of modern AC home appliances.

Your unit’s inverter regulates compressor motor speed in response to indoor temperature. Modern air conditioning systems are more adaptable than their predecessors and can make small daily adjustments. They won’t have to work hard to maintain a suitable temperature in your home. Along with inverter technology, today’s systems typically have a warning system to let you know when it’s time to clean or replace your filter. So contact  HVAC Contractor in Kansas City for all HVAC needs.

Call for our assistance

Delta T Heating and Cooling is here to assist you in choosing the best modern AC for your house. Before suggesting an upgrade, our professionals will understand all your heating and cooling needs and will look after any additional problems. Call us for AC service in Kansas City, KS.

Importance of maintaining your HVAC unit

Maintaining your air conditioner reduces 50% of your electricity bills. In addition, over time, regular maintenance of a furnace and HVAC units improves the coordination of moving parts.

For the customer’s convenience, Delta T Heating and Cooling assure you some of the best benefits, some of which are listed below-

Maintenance increases the energy -efficiency of the heating systems

  • When you schedule your maintenance service for your furnace, it works more efficiently. A well-maintained furnace has a generator that burns oil completely for combustion to work efficiently, requiring less energy to do the job. 
  • Energy-efficient heating systems such as furnaces and heat pumps consume less energy than less energy-efficient furnaces and heat pumps, drastically reducing your energy-utility bills.
  • In addition, cleaning or replacing the filter also helps with efficiency because your furnace can circulate air through your home more easily – instead of trying to force it through a clogged filter.

Whether you are in Kansas City, MO, Leawood, KS, or other parts of City, Missouri, and are searching for reliable and top-grade HVAC Near me, Delta T Heating and Cooling is the solution for all kinds of heating needs.  

Maintenance adds to the lifespan of the furnace and heat pumps

  • Regular maintenance by professional technicians can detect faulty thermostats, blowers, ignitors, air vents, and channels and replace old carbon monoxide detectors and air filters with new ones.
  •  Maintenance also includes inspecting the evaporator’s coils and refrigerant leakage and assessing how instantaneously and smoothly a heat pump reverses a process.
  • Delta T Heating and Cooling is one of the top-ranking HVAC Companies in Kansas City, delivering customer satisfaction guaranteeing heater tune-up, heater repair, heater maintenance, and heater installation at fair prices.
  • We provide reasonable, leading installation, maintenance, and repair in Kansas City, KS. All your heating services are schedulable on our website or through phone number – (9130687-1494.

Maintenance of the system guarantees safe breathing

  •  One benefit of maintaining your heat pump is that it ensures that you breathe toxin-free indoor air quality (IAQ). A poorly maintained heating system allows more allergens and potentially harmful substances to circulate indoors during the warm spring and summer months. 
  • Poor air quality is likely to undermine your respiratory health. 

Low IAQ levels have some severe consequences. A few severe problems include the following – 

  1. Asthma 
  2. Legionnaire disease/
  3. Common lung infections such as bronchitis.
  4.  COPD
  5.  Irritation in eyes
  6. Dry coughs and running nose
  7. Weak Immune System.
  •   Removing your dirty air filter and replacing it with a new air filter after every month, depending on the size of the filter, is undoubtedly an effective way to improve the air quality index of your spaces.    
  •  Delta T Heating and Cooling have been administering the leading, convenient, high-grade, safe, and fair pricing heater maintenance, heater repair, and heater Installation in Kansas City, KS, by licensed and professional HVAC technicians having experience in the implementation of services.

Maintenance service trims your energy- utility bills

 

  • Since maintenance involves holistic care of your HVAC system, every component works with flawless performance during maintenance.
  • Complete care right from the evaporator coil to the air channels is the prime requirement of your HVAC system. The customer’s convenience is the top priority of Delta T Heating and Cooling.
  •  Maintenance of your furnace and HVAC unit also fixes sounds from your unit and other defective parts at an affordable price.  
  • Complete care of your HVAC unit or furnace removes the extra load on your furnace and heat pumps for the heating cycle. A maintained HVAC unit or furnace instantly brings down your electricity bills.

Maintenance Provides safety in case of threats

  • Our convenient, affordable, safe heater Installation in Kansas City, KS, has high vendor rates, response rates, and customer -preference in terms of reliability, high – quality, and value for the customer’s time.
  • Installation of new components/ repair or replacement of old HVAC units safeguards you against possible future threats during winter.
  • As your most recommended HVAC Contractor in Kansas City, we are available for 24*7 emergency services for all residential and commercial purposes. 

Delta T Heating and Cooling is the ideal Furnace Repair in Kansas City  and a one-stop-shop for all heating equipment with authentic and five-star reviews on Google, Facebook, and other platforms.

5 Signs You Need Immediate Furnace Tune-Up

Most homeowners rely on their furnace to keep their homes warm all winter. Did you know that furnaces need regular tune-ups to keep them running efficiently?

Furnace tune-ups are crucial because they help maintain optimal furnace performance and prevent minor problems from becoming huge and expensive repairs. Just like any other kind of mechanical equipment, furnaces need regular maintenance to run properly.

Not sure if your furnace needs a maintenance tune-up? Here are five signs that it’s time to call a heating tune-up technician:

Signs You Need a Furnace Needs Tune Up

Rise in Energy Bills:

If you’ve noticed a sudden spike in your energy bills, it could be due to your furnace working overtime to heat your home. Furnaces should operate efficiently by using a specific quantity of electricity, so an increase in energy bills is often a sign that your furnace needs to be serviced. Reach out to Delta T Heating and Cooling for heating services in Kansas City.

Strange Noises:

If you are hearing strange noises from your furnace, it’s definitely time to call a technician for a tune-up. These noises could be anything from banging or popping to rattling or squealing, and they usually indicate something is wrong with the furnace’s internal components. Some of these sounds may cause explosions or a system failure if they are ignored.

Leaking Carbon Monoxide:

A furnace that is not vented correctly can leak carbon monoxide, which is a poisonous gas. Leaking carbon monoxide from your heating unit can lead to safety hazards and serious health problems. If you notice any strange odors or fumes coming from your furnace, it’s important to call a technician immediately for a safety inspection and heating repair in Kansas City.

You should also keep an eye on your heating unit’s pilot light. The pilot light usually burns blue, but if it turns yellow, that could be a sign of carbon monoxide poisoning.

Inconsistent Temperatures:

A furnace should be able to keep your environment warm. If you’ve noticed that the temperature in your home is noticeably hotter or colder, it’s probably due to a problem with your furnace. It is often caused by dirty furnace filters or a heater that is the wrong size for your home. A furnace tune-up can help you fix these problems and restore consistent temperatures in your home.

Constant Furnace Cycling:

A faulty wiring, a malfunctioning thermostat, or an issue in the fan motor can cause the heating system to turn on and off frequently. This furnace problem can waste a lot of energy and end up costing you more money in the long run. If you notice your heater cycling more frequently than usual, it’s time to call a technician for furnace repair.

If you’ve noticed any of these furnace problems, don’t wait to call Delta T Heating and Cooling at (913)-687-1494. Our team of certified furnace tune-up technicians can help you get to the bottom of the problem and ensure that your furnace is running efficiently. Contact us today to schedule furnace repair or furnace tune-up in Kansas City!

Checklist for Furnace Maintenance

As winter approaches in Kansas City and temperatures start to drop, it’s time to start thinking about furnace maintenance. After all, you don’t want your furnace to break down in the middle of a cold snap!

Points for Furnace Maintenance:

Here at Delta T Heating and Cooling, we’re experts in furnace maintenance and furnace repair in Kansas City. We’ve put together this handy checklist to help you make sure your furnace is ready for winter:

Air Filter

An air filter helps to remove dust, dirt, and other airborne particles from the air that circulates through your furnace. A clean air filter is essential for efficient furnace operation, so make sure to change it every 1-2 months to ensure efficient operation.

Lubricate Blower, Fans, and Other Moving Parts:

Blowers and fans are the moving parts in your furnace that circulate air. Lubricating these parts help to keep them operating smoothly and prevents them from overheating.

Furnace Burner:

The furnace burner is the part of the furnace that actually burns fuel (usually natural gas or propane) to create heat. Over time, the burner can become dirty, which can cause furnace problems. It should be cleaned to remove any built-up dirt or debris.

Furnace pilot light:

The furnace pilot light is a small flame that ignites the furnace burner. If the furnace pilot light goes out, the furnace will not operate.

Next, the color of the pilot light should be blue. If it’s not, there may be a problem with the furnace.

Electrical Connections

The heating system’s electrical connections should be checked yearly to ensure they are tight and free of any corrosion during the heating maintenance. 

Heat Exchanger

The furnace heat exchanger is responsible for heating the air. Over time, the heat exchanger can become cracked or damaged, which can be a safety hazard. If you see any, the heat exchanger will need a repair or replacement.

Connections to Gas or Oil Lines

If your furnace is powered by gas or oil, it will have connections to gas or oil lines. These connections can become loose over time, which can lead to safety hazards.

System Controls

The furnace system controls are the parts of the furnace that control the furnace operation. Over time, these controls can become worn or damaged, which can cause furnace problems.

Carbon Monoxide Levels

If your furnace is producing carbon monoxide, it can be a safety hazard. Use a carbon monoxide detector to test the air near the furnace. If the carbon monoxide levels are high, call us for furnace maintenance. So contact HVAC Companies in Kansas City to resolve your problems related to furnace and HVAC.

Thermostat

The furnace thermostat is the part of the furnace that controls the furnace temperature. Over time, the thermostat can become inaccurate, which can cause furnace problems.

Humidifiers

If your furnace has a humidifier, it is crucial to check it yearly to make sure it is working properly. A humidifier can help to increase the comfort level in your home by adding moisture to the air. However, if the humidifier isn’t working properly, it can actually do more harm than good.

Now that you know what furnace maintenance tasks to complete, it’s time to get started! Schedule heating services in Kansas City with Delta T Heating and Cooling today to ensure your furnace is ready for winter. Give us a call at (913)-687-1494.

Seven Furnace Efficiency Tips To Save Energy

As the weather cools down, you find yourself spending more time indoors, and therefore, even end up using more energy as a result. Furnace efficiency is most important for enjoying a warm and comfortable stay indoors, especially in the coming months. 

Delta T Heating & Cooling Providing heating services in Kansas City and surrounding areas. It is essential to be smart in energy spending and smarter as the mercury dips outside. We have enumerated seven furnace efficiency tips, which could save you a lot of energy and money. 

Seven Tips To Save Energy This Winter:

  • Clean and Change Your Air Filters:

Since furnaces are used so actively in winters, the filters of your furnaces can get clogged with dust and dirt, thereby reducing the amount of warm air reaching inside your house. That will lead you to raise the temperatures of your heating systems, which will be a reason for higher electricity bills. Check your filters regularly and clean them every month. It is essential to change your filters at least every three months. 

  • Don’t Block The Air Vents:

Take a look around your house and check if there are any obstructions near your air vents. Remove any unwanted furniture or drapes that could block warm air coming from your furnace. Vacuum the vents opening to keep them clean and free of dust or dirt. 

  • Switch To a Smart Thermostat:

A smart thermostat is a smart way to save electricity in the winter. Programmable thermostats allow you to fine-tune and optimize your furnace as required. You can also program the thermostat to turn down when you are asleep or away and then set it warmer for just before your arrival back home. In winter, you can reduce your electricity bill by spending a little on a smart thermostat. 

  • Put on Your Woolens:

On days when it gets extremely cold, instead of just raising the temperature of your thermostat, it will be better to put on some warm clothes to feel comfortable indoors. Warmer clothing will save your energy as well as money. 

  • Weatherstrip Doors and Windows:

Most of the warm air in the house is lost through the gaps and crevices on doors and windows. You can put a stop to it by weatherstripping them. Additionally, door sweeps and draft stoppers can stop air from leaking out and give you some protection from the cold.

  • Upgrade Your Furnace:

Older furnaces usually have a lesser efficiency range than newer ones. Studies show that modern high-efficiency heating systems can provide up to 90%-95% efficiency. Buying a new model might also get you some offers and rebates and help you cut down on your energy bills. You must contact a certified furnace replacement in Kansas City, KS, for assistance in this regard. 

  • Get Regular Furnace Maintenance:

One of the surest ways to reduce your energy bills is to call for HVAC maintenance before the onset of winters. Getting your furnaces inspected by HVAC professionals will increase their efficiency and lifespan. 

We’re here to help!

If you are looking for a reliable furnace repair in Kansas City, KS – feel free to contact Delta T Heating and Cooling. Our qualified team will help you keep your home warmer. Just visit our website or give a call on (913) 687 1494.